Wood-to-Concrete Connectors

'Half-connector' with one pin at the end
Overall length 4 3/4"
One slot with 7/8" internal thread at other end
1 1/8 inch holes recommended for both pipe and pin
Pin hole center from end of pipe = 3 7/8" plus any exposed threaded rod from stand off to bottom of pipe (when connecting post to concrete and post to steel)
Pin hole center to center = 7 3/4" + exposed threaded rod (when you use two A475's + threaded rod to customize your own TIMBERLINX)

Designed to customize any length of TIMBERLINX you require using 7/8 nine threaded rod
Concealed hold-down, wood to concrete
(A475 attached to 7/8" concrete expansion anchor)
Join wood to steel
(A475 attached to 7/8" threaded rod with 7/8" nut and washer)
Can be used with threaded rod and nut and washer
Can be used with our custom made Lag Screw for Newel posts
Can be used to Join Beams and Posts to existing Buildings
Customers are discovering new uses for A475 every day